Endoscopic high-temperature furnace flame monitoring system


General functional characteristics

◆The internal cooling channel of the double-layer stainless steel protective cover adopts the vortex refrigeration principle, which has an ideal cooling effect.

◆The internal equipment of the double-layer stainless steel protective cover is equipped with a special aviation socket for external cable connection. The water and gas interfaces are connected with special stainless steel hoses using quick connection interfaces. The connecting clamps of the protective cover and the transmission trolley of the transmission device are connected by bolt hoisting.

◆The system can be air-cooled to meet the requirements of long-term operation under harsh conditions such as high temperature and strong corrosion.

◆The transmission mechanism is electric, and has the function of automatically driving the camera probe to exit the monitoring position when the system over-temperature alarm, gas, water or power failure are in the state, so as to prevent damage to the equipment body.

◆The control of the system consists of an intelligent local control device and a remote control device. The intelligent local controller can realize automatic or manual control, and can also operate under the command of the remote control device.

◆The control of the system is controlled by a centralized controller to control the aperture, zoom, focal length of the camera probe and the forward and backward functions of the transmission mechanism.

◆You can also use video server software to implement all related functions, and you only need to operate the mouse to complete all instructions. Technical performance of the installation base of the high-temperature flame monitoring equipment set:

◆The equipment is used to connect and fix the transmission device, which can be pre-buried in the monitoring hole. It consists of a pre-embedded part body and a mounting bracket.

◆The installation base is welded to the furnace wall through the mounting bracket. The fixing bolts of the mounting bracket can be used to adjust the angle of the transmission device, so that the camera probe can be aimed at the monitoring target.

◆When the probe assembly exits the monitoring hole, the automatic sealing plate can immediately close the furnace wall.

   
Shanghai ICP No. 16008005  |  Shanghai Public Security Network No. 31011202011781  |  yiji All rights reserved. longti